Supermicro X10DRD-L-O

Detailed information

Motherboards

Supermicro motherboards support the latest generation Intel and AMD processors, memories and offer the most advanced technologies in the IT field – NVMe, M.2, 10GbE network ports. Thanks to their high scalability and a wide choice of form factors, the boards can fulfill the needs of even the most demanding customers. Supermicro offers the broadest selection of servers designed for industrial use, which is reflected in the overall quality of the boards. Materials that guarantee a long lifespan are used for manufacturing Supermicro motherboards, thanks to which a minimal failure rate is achieved. Supermicro motherboards go through a generational exchange approximately once every seven years, which guarantees long support by the manufacturer. Each Supermicro motherboard also allows free installation of specialized software for basic system monitoring.

The purchase of NBD warranty of your own choice is a matter of course, which minimizes service outages even in cases that cannot be predicted. Contact our sales department for more information. Standard NBD warranties are offered for 3 or 5 years. 

Product specifications

Product SKUs MBD-X10DRD-L -O X10DRD-L (Standard Retail Pack) MBD-X10DRD-L -B X10DRD-L (Bulk Pack)   Physical Stats Form Factor E-ATX Dimensions 13.05" x 10.5" (33.1cm x 26.7cm)   Processor/Cache CPU Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP **) Dual Socket R3 (LGA 2011) Cores / Cache Up to 22 Cores† / Up to 55MB† Cache System Bus QPI up to 9.6 GT/s Note † BIOS version 2.0 or above is required Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.   System Memory Memory Capacity 8x 288-pin DDR4 DIMM slots Up to 1TB† ECC 3DS LRDIMM, 512 ECC RDIMM Memory Type 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit DIMM Sizes RDIMM: 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB Memory Voltage 1.2 V Error Detection Corrects single-bit errors   On-Board Devices Chipset Intel® C612 chipset AHCI SATA SATA3 (6Gbps); RAID 0, 1, 5, 10 IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC Network Controllers Intel® i350 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8211E PHY (dedicated IPMI) Video ASPEED AST2400 BMC   Input / Output SATA 6x SATA3 (6Gbps) ports LAN 2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port USB 7x USB 2.0 ports total (4 rear, 2 via headers, 1 Type A) Video 1x VGA port Serial Port / Header 2x COM Ports (1 rear, 1 header) DOM 2x SuperDOM (Disk on Module) ports TPM 1x TPM 1.2 20-pin Header

Chassis (Optimized for X10DRD-L ) 1U Chassis: SC514-441 SC514-R400C SC514-505 SC813LT-350CB SC813LT-R500CB Important Chassis Notes To support the new generation Intel® Xeon® processor-based motherboards,Revision M chassis is recommended. Please talk to your sales representative for details.   SuperServer(s) with X10DRD-L Model(s) SYS-6018R-MD SYS-6018R-TD SYS-6018R-MDR Expansion Slots PCI-Express 1x PCI-E 3.0 x8 slot   System BIOS BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS BIOS Features Plug and Play (PnP) PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1   Management Software Intel Node Manager IPMI 2.0 NMI SuperDoctor® 5 Watch Dog Power Configurations ACPI Power Management Power-on mode for AC power recovery   PC Health Monitoring Voltage Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, +3.3V Standby, VBAT, Memory Voltages. 4 Phase-switching voltage regulator FAN 8x 4-pin fan headers (up to 8 fans) 8x fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors Thermal Monitor 2 (TM2) support PECI LED CPU / System Overheat LED Suspend static indicator LED UID/Remote UID Other Features RoHS   Operating Environment Operating Temperature Range 10°C - 35°C (50°F - 95°F) Non-Operating Temperature Range -40°C - 70°C (-40°F - 158°F) Operating Relative Humidity Range 8% - 90% (non-condensing) Non-Operating Relative Humidity Range 5% - 95% (non-condensing)