| |
| SYS-5019S-WR |
- SuperServer 5019S-WR (Black)
|
| |
| |
| CPU |
- Single Socket H4 (LGA 1151) supports:
- Intel® Xeon® processor E3-1200 v6/v5,
Intel® 7th/6th Gen Core™ i3,
Intel® Pentium®,
Intel® Celeron® processors
- CPU TDP up to 80W
|
| Note |
BIOS version 2.0 or above is required to support Intel® Xeon® Processor E3-1200 v6 series or 7th Generation Intel® Core™ Processors |
| |
| |
| Memory Capacity |
- 4x 288-pin DDR4 DIMM slots
- Up to 64GB DDR4 ECC UDIMM
|
| Memory Type |
- 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
| |
| Chipset |
|
| SATA |
- SATA3 (6Gbps) via C236 controller
- RAID 0, 1, 5, 10 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers |
- Dual Intel® I210-AT Gigabit Ethernet LAN ports
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Video |
|
| |
| |
| SATA |
|
| LAN |
- 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 dedicated IPMI LAN port
|
| USB |
- 2 USB 3.0 ports (rear)
- 2 USB 2.0 ports (rear)
|
| Video |
|
| Serial Port / Header |
|
| SuperDOM |
- 2 SuperDOM (Disk on Module) ports with built-in power
|
| |
| |
| Voltage |
- Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
|
| FAN |
- Total of 6 fan headers supporting up to 6 fans
- 3 fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- System Information LED
- Suspend static indicator LED
- UID/Remote UID
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- RoHS, Halogen Free
|
|
 |
| |
| |
| Height |
|
| Width |
|
| Depth |
|
| Package |
- 23.5" (W) x 8.5" (H) x 33.7" (L)
|
| Weight |
- Net Weight: 24 lbs (10.9 kg)
- Gross Weight: 35 lbs (15.9 kg)
|
| Available Colors |
|
| |
| |
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- Network activity LEDs
- System Information LED
- Information LED (temp., status)
|
| |
| |
| PCI-E |
- 1 PCI-E 3.0 x16 Left Riser Slot,
- 1 PCI-E 3.0 x4 (in x16 slot)
|
| M.2 |
- M.2 Interface: PCI-E 3.0 x4 and SATA
- Form Factor: 2260, 2280, 22110
- Key: M-Key
- Double Height Connector
|
| |
| |
| Hot-swap |
- 4 Hot-swap 3.5" SATA3 drive bays
|
| |
| |
SAS/SATA HDD Backplane
(SAS support requires optional SAS controller) |
| |
| |
| Fans |
- 4x 4cm chassis internal fans
|
| |
| |
| 500W high-efficiency (94+%) power supply w/ PMBus |
| With Power Distributor |
- +5V: 25 Amp
- +3.3V: 12 Amp
- -12V: 0.6 Amp
|
| Certification |
  Platinum Certified
[ Test Report ] |
| |
| |
| BIOS Type |
- 8MB SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
| |
RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
Server system integrator & worldwide shipping
Personal approach and tailor-made servers
NBD warranties & cross-shipping
Private cloud infrastructure
Pre-sales & After-sales support
