Detailed information
End of Life product, the price is only informative, we’ve prepared this alternatives for you.
| |
 |
Super X8DTU-LN4F+ |
| |
|
| CPU |
- Dual 1366-pin LGA Sockets
- Intel Xeon Processor 5600 Series
- Intel Xeon Processor 5500 Series
|
| QPI |
up to 6.4 GT/s |
| |
|
| Memory Capacity |
- 18x 240-pin DIMM slots
- Supports up to 288GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
|
| Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
|
| Chipset |
- Intel® 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond WPCM450 BMC
|
| Network Controllers |
- 2x Intel® 82576 Dual-Port Gigabit Ethernet Controllers (4 ports)
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| Super I/O |
|
| |
|
| Serial ATA |
- 6x Serial ATA ports
- 6x SATA hard drives supported
|
| LAN |
- 4x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 2x USB rear ports
- 1x USB on-board
- 3x USB internal headers
- Total 8 USB 2.0 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
|
|
 |
|
|
| Form Factor |
|
| Model |
|
| |
|
| Width |
|
| Height |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
- Unit Identification (UID) button
|
| LEDs |
- 2x Network activity LEDs
- Fan Fail/System Over Heat LED
- HDD activity LED
- Power status LED
- Unit Identification (UID) LED
|
| |
|
| PCI-Express |
- Left Side: 1 (x16) PCI-E 2.0 + 1 PCI-E 2.0 x4 by riser card
- Right Side: 1 (x8) PCI-E 2.0 + 1 PCI-E 2.0 x4 by riser card
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
| |
|
| Hot-swap |
- 8 x 2.5" hot-swap SAS/SATA drive bay
|
| |
|
| 8-port 1U TQ (W/ AMI 9072) backplane, support up to 8x 2.5-inch SAS/SATA HDD/SSD |
| |
|
| Fans |
|
| |
|
| 1U 700W Hot Swap Redundant Power Supply |
| Power Efficiency |
|
| Total Output Power and Input |
- 700W with Input 100 - 140Vac
- 750W with Input 180 - 240Vac
|
| +5V standby |
|
| +12V |
- Max: 58A / Min: 0.5A (100Vac - 140Vac)
- Max: 62A / Min: 0.5A (180Vac - 240Vac)
|
| Dimensions (L x W x H) |
|
| Certification |
Gold Certified |
| |
|
| BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature:
10° to 35° C (50° to 95°F)
- Non-operating Temperature:
-40° to 70° C (-40° to 158° F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
Server system integrator & worldwide shipping
Personal approach and tailor-made servers
NBD warranties & cross-shipping
Private cloud infrastructure
Pre-sales & After-sales support
