Supermicro MBD-X10SDV-2C-7TP4F-B

Detailed information

Motherboards

Supermicro motherboards support the latest generation Intel and AMD processors, memories and offer the most advanced technologies in the IT field – NVMe, M.2, 10GbE network ports. Thanks to their high scalability and a wide choice of form factors, the boards can fulfill the needs of even the most demanding customers. Supermicro offers the broadest selection of servers designed for industrial use, which is reflected in the overall quality of the boards. Materials that guarantee a long lifespan are used for manufacturing Supermicro motherboards, thanks to which a minimal failure rate is achieved. Supermicro motherboards go through a generational exchange approximately once every seven years, which guarantees long support by the manufacturer. Each Supermicro motherboard also allows free installation of specialized software for basic system monitoring.

The purchase of NBD warranty of your own choice is a matter of course, which minimizes service outages even in cases that cannot be predicted. Contact our sales department for more information. Standard NBD warranties are offered for 3 or 5 years.

Product specifications

Product SKUs MBD-X10SDV-2C-7TP4F X10SDV-2C-7TP4F   Physical Stats Form Factor Flex ATX Dimensions 9.0" x 7.25" (22.86cm x 18.42cm)   Processor/Cache CPU Intel® Pentium® Processor D1508. Socket FCBGA1667 supported, CPU TDP support 25W Cores / Cache 2 cores, 4 threads / 3MB cache   System Memory Memory Capacity Up to 128GB Registered ECC RDIMM, DDR4-1866MHz Up to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-1866MHz, in 4 DIMM slots Memory Type 1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM DIMM Sizes 4GB, 8GB, 16GB, 32GB Memory Voltage 1.2V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory)   On-Board Devices Chipset System on Chip SATA SoC controller for 4 SATA3 (6 Gbps) ports; RAID 0,1,5,10 SAS Broadcom 2116 SW controller for 16 SATA3 (6Gbps) ports; SAS2 and SATA3 IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Network Controllers Dual LAN with 10G SFP+ from D-1500 SoC Dual LAN with 1GbE with Intel® I210 Graphics Aspeed AST2400 BMC   Input / Output SATA 4 SATA3 (6Gbps) port LAN 2 10G SFP+ LAN ports 2 1GbE LAN ports 1 RJ45 Dedicated IPMI LAN port USB 5 USB 2.0 ports (4 headers, 1 Type A) 2 USB 3.0 ports (2 rear) Video Output 1 VGA port Serial Port / Header 1 COM Port (1 header) TPM TPM Header

Expansion Slots PCI-E 2 PCI-E 3.0 x8 Mini-PCI-E with mSATA support M.2 M.2 Interface: 1 SATA/PCI-E 3.0 x4 Form Factor: 2242, 2280, 22110 Key: M-Key   System BIOS BIOS Type 128Mb SPI Flash with AMI BIOS BIOS Features PCI 3.0 ACPI 5.0 USB Keyboard support Hardware BIOS Virus protection SMBIOS 2.8 UEFI 2.4   Management Software Intel® Node Manager, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog Power Configurations ACPI Power Management ATX Power connector +12V DC Power Input Control of power-on for recovery from AC power loss CPU thermal trip support for processor protection M.2 NGFF connector, Node Manager Support, SDDC, System level control, UID, WOL   PC Health Monitoring Voltage +1.8V, +12V, +3.3V, +5V, Chassis intrusion header, Monitors for CPU Cores, System level control, VBAT FAN 6x 4-pin fan headers (up to 6 fans), Dual Cooling Zone, Low noise fan speed control, Overheat LED indication, PWM fan speed control, Status monitoring for on/off control, Status monitoring for speed control Temperature Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI LED CPU / System Overheat LED Other Features 12V DC or ATX Power Source, Chassis intrusion detection, Chassis intrusion header, RoHS   Operating Environment Operating Temperature Range 0°C ~ 60°C (32°F ~ 140°F) Non-Operating Temperature Range -40°C - 85°C (-40°F - 185°F) Operating Relative Humidity Range 10% ~ 85% (non-condensing) Non-Operating Relative Humidity Range 10% ~ 95% (non-condensing)