HP

The HPE ProLiant DL380 Gen11 server is a scalable 2U 2P solution that delivers exceptional compute performance expandability, and scalability for diverse workloads and environments at 1P economics. Powered by 4th Gen Intel® Xeon® Scalable Processors with up to 60 cores, increased memory bandwidth, and high-speed PCIe Gen5 I/O, the HPE ProLiant DL380 Gen11 server is a perfect dual-socket, 2U/2P, scalable solution.

Switch, 48 x 10/100/1000 ports (RJ-45), 4 x SFP+ 1/10 Gbe ports, 1 x dual personality RJ-45/USB micro-B slot. Power over Ethernet support.

HPE ProLiant DL380 Gen10 Plus server with one Intel® Xeon® Silver 4309Y Processor, 64 GB (2x32 GB) Dual Rank Memory, one HPE SR416i-a Gen10 Plus x16 Lanes 4GB Cache NVMe/SAS 24G Controller, Drive Bay(s) for 8 small form factor drives, one HPE DL38X Gen10 Plus Maximum Performance Fan Kit, two HPE 480GB SATA 6G Read Intensive SFF BC Multi Vendor SSDs, two HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kits, and a 3/3/3 warranty

Capacity: 16 GB Memory speed: 2933 MHz Typ: RDIMM Type: DDR4 288-pin Rank: 1Rx4 Error Correction Code (ECC): Yes Latency: CL21

Aruba 2930M 24G 1-slot. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 20. Full duplex. MAC address table: 32768 entries, Switching capacity: 128 Gbit/s. Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u. Rack mounting, Form factor: 1U

HPE ProLiant ML350 Gen10 tower server with one Intel® Xeon® Silver 4208 processor, 16 GB memory, four large form factor drive bays, and one 800W power supply

HPE P21112-B21 Intel E810 100gbe 2-port Qsfp28 Ethernet Adapter Device Type:Network Adapter Form Factor: Plug-in Card Interface (bus) Type Pci: Express 4.0 X16 Pci Specification Revision: Pcie 4.0 Ports: 100 Gigabit Qsfp28 X 2 Dimensions: (wxdxh) 8.5 In X 9.7 In X 2.4 In Weight: 11.64 Oz Data Link Protocol: 100 Gigabit Ethernet Data Transfer Rate: 100 Gbps Network / Transport Protocol Tcp/ip, Iscsi, Iwarp Designed For Edgeline E920d, Proliant Dl110 Gen10, Dl325 Gen10, Dl345 Gen10, Dl360 Gen10, Dl365 Gen10, Dl380 Gen10, Dl385 Gen10

HPE Ethernet 10Gb 2-port SFP+ QL41132HQCU OCP3. Internal. Connectivity technology: Wired, Host interface: PCI Express, Interface: Ethernet / Fiber. Maximum data transfer rate: 10000 Mbit/s

HPE ProLiant DL360 Gen10 Plus server with one Intel® Xeon® Scalable 4309Y processor, 1x 32 GB dual rank memory, HPE SR100i Gen10 Plus FIO Software RAID Controller, eight small form factor SAS/SATA drive bays, five standard fans, one HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply, and a 3/3/3 warranty.

The HPE FlexNetwork 5140 EI switch series includes gigabit Ethernet switches that support static routing, OSPF and RIP Layer 3 routing, convenient fixed 10 GbE uplink ports, PoE+, ACL, IPv6, and energy savings through energy-efficient Ethernet. The switches feature 48x RJ-45 autosensing 10/100/1000 ports and 4x 1000/10000 SFP+ ports.

Better Performance HPE Gen10 Plus Ethernet Adapters are engineered for an assortment of bandwidths and latency sensitive applications. Reduces CPU utilization with support for a variety of I/O offloads including RDMA and Tunneling. Reliability and Security HPE Gen10 Plus Ethernet Adapters authenticate updates for NICs that signed firmware is correct and trusted to reduce rogue firmware installation. Protect applications, data, and server infrastructure by authenticating digitally-signed firmware via a root of trust architecture.

Capacity: 16 GB Memory speed: 2933 MHz Typ: DIMM Type: DDR4 288-pin Error Correction Code (ECC): Yes Latency: CL21