Supermicro MBD-X10DRL-IT-O

Detailed information

Motherboards

Supermicro motherboards support the latest generation Intel and AMD processors, memories and offer the most advanced technologies in the IT field – NVMe, M.2, 10GbE network ports. Thanks to their high scalability and a wide choice of form factors, the boards can fulfill the needs of even the most demanding customers. Supermicro offers the broadest selection of servers designed for industrial use, which is reflected in the overall quality of the boards. Materials that guarantee a long lifespan are used for manufacturing Supermicro motherboards, thanks to which a minimal failure rate is achieved. Supermicro motherboards go through a generational exchange approximately once every seven years, which guarantees long support by the manufacturer. Each Supermicro motherboard also allows free installation of specialized software for basic system monitoring.

The purchase of NBD warranty of your own choice is a matter of course, which minimizes service outages even in cases that cannot be predicted. Contact our sales department for more information. Standard NBD warranties are offered for 3 or 5 years.

Product specifications

Product SKUs MBD-X10DRL-iT -O X10DRL-iT (Standard Retail Pack) MBD-X10DRL-iT -B X10DRL-iT (Bulk Pack)   Physical Stats Form Factor ATX Dimensions 12" x 10" (30.48cm x 25.4cm)   Processor/Cache CPU Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP**) Dual Socket R3 (LGA 2011) Cores / Cache Up to 22 Cores† / Up to 55MB† Cache System Bus QPI up to 9.6 GT/s Note † BIOS version 2.0 or above is required Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.   System Memory Memory Capacity 8x 288-pin DDR4 DIMM slots Up to 1TB† ECC 3DS LRDIMM, 512GB ECC RDIMM Memory Type 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit DIMM Sizes RDIMM: 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB Memory Voltage 1.2 V Error Detection Corrects single-bit errors   On-Board Devices Chipset Intel® C612 chipset AHCI SATA SATA3 (6Gbps); RAID 0, 1, 5, 10 SCU SATA SATA3 (6Gbps); RAID 0, 1, 5, 10 IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC Network Controllers Intel® X540 10GBase-T controller Intel® i210 Gigabit Ethernet controller Supports 10GBASE-T, 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8211E PHY (dedicated IPMI) Video ASPEED AST2400 BMC   Input / Output SATA 6x SATA3 (6Gbps) ports I-SATA 4 and I-SATA 5 support SATA DOM LAN 2x RJ45 10GBase-T LAN ports 2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port USB 4x USB 3.0 ports (2 rear + 2 via header) 3x USB 2.0 ports (2 via header + 1 Type A) Video 1x VGA port Serial Port / Header 1x COM port (1 header) DOM 2x SuperDOM (Disk on Module) ports 1x SATA DOM power connector TPM 1x TPM Header Chassis (Optimized for X10DRL-iT ) 1U Chassis: SC813MFTQ-441CB SC813MFTQ-R400CB SC813MFTQ-R606CB SC113MFAC2-R606CB SC514-R400C SC514-441 SC514-505 SC813MFTQC-505CB SC113MFAC2-605CB 2U Chassis: SC823TQ-653LPB SC826TQ-R500LPB SC213LT-600LPB SC825TQ-R740LPB SC213AC-R920LPB SC825TQ-563LPB 3U Chassis: SC833T-653B SC836BE1C-R1K03B SC836TQ-R500B 4U / Tower Chassis: SC842TQ-865B SC842TQ-665B Important Chassis Notes To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details. Optional 1U I/O shield MCP-260-00061-0N is required to fit with 1U chassis     Expansion Slots PCI-Express 1x PCI-E 3.0 x16 2x PCI-E 3.0 x8   System BIOS BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS BIOS Features Plug and Play (PnP) PCI 2.3 ACPI 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1   Management Software IPMI 2.0 SPM SUM SuperDoctor® 5 Intel® Node Manager 3.0 Watch Dog Power Configurations ACPI Power Management Power-on mode for AC power recovery   PC Health Monitoring Voltage Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, Memory Voltages. 5 Phase-switching voltage regulator FAN 8x 4-pin fan headers (up to 8 fans) 8x fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors Thermal Monitor 2 (TM2) support PECI LED CPU / System Overheat LED Suspend static indicator LED UID/Remote UID Other Features Chassis intrusion detection Chassis intrusion header RoHS Dual Cooling Zones   Operating Environment Operating Temperature Range 10°C - 35°C (50°F - 95°F) Non-Operating Temperature Range -40°C - 70°C (-40°F - 158°F) Operating Relative Humidity Range 8% - 90% (non-condensing) Non-Operating Relative Humidity Range 5% - 95% (non-condensing)

Parts List (Bulk)   Part Number Qty Description X10DRL-iT MBD-X10DRL-iT 1 X10DRL-iT Motherboard I/O Cables CBL-0044L 2 SATA CABLE 61CM FLAT S-S PBF I/O Shield MCP-260-00062-1N 1 Standard I/O shield for X10DRL-CT with EMI Gasket Parts List (retail)   Part Number Qty Description X10DRL-iT MBD-X10DRL-iT 1 X10DRL-iT Motherboard I/O Cables CBL-0044L 6 SATA CABLE 61CM FLAT S-S PBF I/O Shield MCP-260-00062-1N 1 Standard I/O shield for X10DRL-CT with EMI Gasket Quick Reference Guide MNL-1620-QRG 1 Quick Reference Guide