Detailed information
EOL product, the price is only informative. Contact our sales department and we'll gladly help you choose an alternative product.
|
|
 |
|
|
|
 |
| SYS-F627R3-F73 |
- SuperServer F627R3-F73 (Black)
|
| |
|
Super X9DRFF-7 |
| |
|
| CPU |
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 135W TDP; 130W TDP up to 47°C *)
- Dual Socket R (LGA 2011)
* For details, refer to the user manual |
| Note |
† BIOS version 3.0 or above is required |
| Cache |
|
| System Bus |
|
| |
|
| Memory Capacity |
- 8x 240-pin DDR3 DIMM slots
- Up to 512GB DDR3 ECC LRDIMM
- Up to 256GB DDR3 ECC Registered memory (RDIMM)
- Up to 64GB DDR3 ECC Un-Buffered memory (UDIMM)
|
| Memory Type |
- 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
| Chipset |
|
| AHCI SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1
|
| SAS |
- SAS2 via Broadcom 2308
- SW RAID 0, 1, 10 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® 82574L Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| |
|
| AHCI SATA |
- 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
|
| SAS |
|
| LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
|
| VGA |
|
| Serial Port / Header |
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Width |
|
| Height |
|
| Depth |
|
| Package |
- 28.3" (W) x 15.0" (H) x 42.4" (D)
|
| Weight |
- Net Weight: 105 lbs (47.63 kg)
- Gross Weight: 150 lbs (68.04 kg)
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
| |
|
| PCI-Express |
- 1 PCI-E 3.0 x16 (LP) via riser card
|
| |
|
| Hot-swap |
- 4x 3.5" Hot-swap SAS/SATA HDD trays
|
| |
|
| 1x SAS2 / SATA backplane |
| |
|
| Fans |
- 8x 8cm heavy duty fans with air shroud and PWM fan speed control
|
| |
|
| 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
| AC Input |
- 1000W Output @ 100-140V, 8-12A, 50-60Hz
- 1280W Output @ 180-240V, 6-8A, 50-60Hz
|
| DC Output |
- 1000W: +12V/83A; +5Vsb/4A
- 1280W: +12V/106.7A, +5Vsb/4A
|
| Certification |
 
Platinum Certified
[ Test Report ] |
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
 |
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| Motherboard / Chassis |
MBD-X9DRFF-7
CSE-F424AF-R1K28BP |
4
1 |
Super X9DRFF-7 Motherboard
4U Chassis |
| Backplane |
BPN-SAS-F424-A4 |
4 |
4-port Fat Twin 6Gbps hot swappable HDD backplane, support up to 4x 3.5-inch SAS/SATA HDD |
| Cable 1 |
CBL-0486L |
4 |
2x2 to 2x2 15cm power cable HF. 18AWG |
| Cable 2 |
CBL-0157L-02 |
4 |
CBL,SGPIO,2X4F TO 2X4F,P2.54,RIBBON IN RND TUBE,27CM,28AWG |
| Cable 3 |
CBL-0473L |
16 |
SATA,INT,ROUND,ST-ST,21CM,30AWG |
| Riser Card |
RSC-R1UFF-E16R |
4 |
RSC-R1UFF-E16R |
| Heatsink / Retention |
SNK-P0048P |
8 |
2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Square ILM MB |
| Mounting Rail |
MCP-290-41803-0N |
1 |
Fat twin F418 / F424 Rail set support 28-33.5 inch depth rail,RoHS/REACH,PBF |
|
|
| |
|
