Micron 5210 ION 2.5" 3.8TB SATA 6Gb/s 3D NAND QLC 7mm, <1DWPD - MTFDDAK3T8QDE-2AV1ZABY

Detailed information

Characteristics

SSDs, or disks with flash memories don't yet reach such high capacities as traditional HDDs. Their undeniable advantages are however their high read/write speed and lower latency. Their lifetimes are basically equal to those of traditional hard drives nowadays, however, it's important to choose the correct key DWPD value (no. of rewrites of the total capacity of the disk within one day).

Interface

When choosing a hard drive it's important to consider the choice of SATA, SAS, or NVMe disks. SATA and SAS disks are intended for both HDDs and SSDs and differ in their theoretical transfer speeds. NVMe disks are flash-based only and as such reach much higher read/write numbers and are also characterized by their very low latency.

Speed and Capacity

A key parameter in terms of hard drives is their RPM, which ranges between 5400 and 15000. This directly influences the speed of the drive and with that, its price. Today, more and more HDDs are being replaced by SSD solutions. SSDs are many times faster and their prices are starting to get closer to those of traditional HDDs. Their access times are also often faster and there's no wear when reading from the flash memory. The newest standard, NVMe, increases the quality of disks with flash memories even more and more hard drive manufacturers are starting to use it.

Product Specifications

Capacity: 3.8 TB
BUS: SATA3
Form Factor : 2.5"
Performance: 540 MBps (read) / 350 MBps (write)
4KB Random read: 83 000 IOPS
4KB Random write: 6 500 IOPS
Endurance: <1 DWPD
Technology: 3D NAND QLC